Spindle Tooling

Step Chucks And Closers are carried in stock in 50.8mm,76.2mm, 101.6mm,127mm and 162mm rated sizes. All step chucks are supplied with pin holes and pins in place for precision machining.

Step Chucks are exceptionally useful for accurately holding work up to 162mm in diameter. Castings, moldings, stampings and machined parts are held rigidly and accurately. Tubing can be held without crushing or distorting.

Chuck Closers fit directly to the machine spindle. A taper corresponding to that on the periphery of the step chuck places the closing pressure over the stepped area of the chuck, resulting in greater gripping power and accuracy.

For: CT-1118CNC, CT-606CNC, CP-27CNC, CTL-618EVS, CHR-68EVS, CTS-27EVS, CP-27EVS, CTL-618e, CHR-68e, CTL-27EVS

Step Chucks are 10mm larger in diameter than the rated size so the full capacity may be readily applied to a depth of 12mm.

Tool No: T-CT-02, T-CT-03, T-CT-04, T-CT-05, T-CT-06

Step Chuck Closers are required for each rated size. A=Threaded, B=Taper

When ordering specify for taper or threaded nose spindle.

Tool No: T-202-2B, T-202-3B, T-202-4B, T-202-5B, T-202-6B

Extra Depth Step Chucks are 10mm larger in diameter than the rated size so the full capacity may be readily applied to a depth of 32mm.

Tool No: T-DCT-02, T-DCT-03, T-DCT-04, T-DCT-05, T-DCT-06

Extra Depth Step Chuck Closers are required for each rated size.

A=Threaded, B=taper
When ordering specify for taper or threaded nose spindle.

Tool No: T-203-2B, T-203-3B, T-203-4B, T-203-5B, T-203-6B

The 5C solid, ejector, and long stops are threaded into and positively shoulder locked in the 5C collet. (Standard 5C collets have internal threads for threaded stops.)

All stops are adjustable for the desired part length to the maximum depths listed below.

Solid Stop-For chucking parts to a depth of 80mm from the collet face. Tool No: T-SS1

Ejector Stop-For chucking parts to a depth of 130mm from the collet face. Tool No: T-ES-1

Long Stop-For chucking parts to a depth of 190mm from the collet face . For work to and including 22mm round,19mm( 3/4") hex and 15mm square. Tool No: T-LS-1

For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e

This stop converts 5C collets into solid stop or spring ejector stop collets, without alteration of the standard collets. The application of this stop to the collet requires no machining, in other words, all collets up to and including 25.4mm capacity can be used in the regular manner or as solid stop collets or as spring ejector stop collets.

Tool No: T-UCS-25

For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e

The collet shank section of the plug chuck is finished for direct application to your machine spindle, the nose section is 37mm in diameter and 44mm long. It can be machined in place for the greatest degree of accuracy to suit your particular requirements for special arbors.

Tool No: T-CT-01

For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e

5C collet fixture plates fit directly in CYCLEMATIC Lathe spindles. They can be machined for mounting of parts. Flange is 25.4mm thick and there are two diameters available,85.7mm and 11mm.

Tool No: T-304A 85.7mm, T-304B 111mm

For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e

The fixture plates are machined all over for direct application to the headstock spindle. Three sizes are are available:76mm, 127mm and 225.4mm diameter. The flange section is 19mm (3/4") thick. The center hole IS 11mm(7/16") in diameter. These plates can be machined to become a fixture or for mounting fixtures to hold work or for mounting special purpose chucks.

(Specify for taper nose spindle)

When ordering, specify whether for taper or threaded nose spindle. A=Threaded, B=Taper

Tool No: T-FP-3B, T-FP-5B, T-FP-8B

For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e

177.8mm diameter face plates are used for holding irregular shaped pieces. Holes are drilled and tapped to permit the use of standard 5/16" X 18bolts.

(Specify for taper nose spindle)

When ordering, specify whether for taper or threaded nose spindle. A=Threaded, B=Taper

Tool No: T-FP-07B

For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e

The fixture plate is machined all over for direct application to the headstock spindle. This plate can be machined to become a fixture or for mounting fixtures to hold work. The fixture plate is available in 76mm, 127mm or 177.8mm diameter,19mm thick. The center hold is 54mm in diameter.

When ordering, specify whether for taper or threaded nose spindle.

Tool No: T-317(Taper)

For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e

This Chuck should be use with fixture plate. The chuck size has 3", 4", 5", and 6"

Tool No: 3 jaw or 4 jaw

For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e

The angle plate fastens directly to the T-slot of the face plate and is used to support work at right angle to the face plate. Work clamping surface is 38mm×6mm

Tool No: T-AP-07

For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e

The headstock center is required when work is to be held between centers. This center requires LT-01-108S or LT-01-108C drive plate to drive work.

Tool No: LT-01-109

For: CTL-618EVS, CTL-27EVS, CT-1118CNC, CTL-618e

The drive plate mounts on the spindle nose and is used in conjunction with the driving dog to drive work between centers. When ordering, specify for taper nose spindle.

Tool No: LT-01-108C

For: CTL-618EVS, CTL-27EVS, CT-1118CNC, CTL-618e

The driving dog is used in conjunction with the drive plate to drive work between centers.

Tool No: LT-01-110T

For: CTL-618EVS, CTL-27EVS, CT-1118CNC, CTL-618e

The Mounting plate is to be machined so it accepts a 3 Jaw chuck.

Six holes are provided to mount the chuck. Three adjusting screws in the outer diameter of the mounting plate are used to center the chuck.

For taper spindle only.

Tool No: T-315

For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e

The Fine turning chuck has move accuracy than normal chuck. It can be Fix the accuracy any time. The Fine turning chuck should use with chuck mounting plate. It only has 6" type of chuck.

Tool No: KM-6

For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e

The 5C Super-Precision Master Expanding Collet is a valuable aid for close-tolerance machining. There is no lateral, movement of the Expanding Collet or Pads. The shoulder face no the machineable pads locates the work for dead length control for facing repetitive parts to the same length. No spindle nose cap is required. Collet threads are separate from collet body to operate an expander.

The master collet is hardened and ground. The pads are soft for turning in the machine spindle for exacting concentricity. Depending on job application, pads may be machined for internal gripping from 6.35mm to 76mm 1.D.

Tool No: S-5C

For: CTL-618EVS, CTS-27EVS, CTL-27EVS, CHR-68EVS, and CP-27EVS, CT-606CNC, CT-1118CNC, CP-27CNC, CTL-618e, CHR-68e

Hydraulic Chuck which has more power to hold the material.

Tool No: TF-3B-4

For: CT-1118CNC, CT-606CNC, CTL-618EVS, CTL-618e, CHR-68EVS, CHR-68e, CTS-27EVS, CTL-27EVS

Max Pressure 7kg/cm²
Max Speed 2000rpm.
Gripping Range Ø4~32mm
Dia of hollow Ø26mm

Tool No: CA5-25

For: CT-1118CNC, CT-606CNC, CTL-618EVS, CTL-618e, CHR-68EVS, CHR-68e, CTS-27EVS, CTL-27EVS

Gripping force is easy adjustment. Repeatability (T.I.R) 5μm.

Max Speed 3200rmp.

Tool No: PA6-100

For: CT-1118CNC, CT-606CNC, CTL-618EVS, CTL-618e, CHR-68EVS, CHR-68e, CTS-27EVS, CTL-27EV

Which can use to hydraulic chuck, Fine turning chuck and normal chuck. After put on chuck, can be turning or facing the sofe jaws.

Tool No: T-3SJ

For: CT-1118CNC, CT-606CNC, CTL-618EVS, CTL-618e, CHR-68EVS, CHR-68e, CTS-27EVS, CTL-27EVS